From Repair Mobile

Jump to: navigation, search
[edit]

Installation of a Nokia 8260 faceplate or antenna

  1. Important: These instructions are to guide you through the process and are to be used at your own risk. Do not poke at the circuit board! Do not have any other power source attached! A T-6 Torx Screwdriver bit will fit those tiny screws on the back of the cell phone to permit removal of the circuit board...
  2. 1) Remove the black back panel covering the battery.
  3. 2) Remove the battery.
  4. 3) Use T-6 Torx Screwdriver to remove the 4 screws visible, 2 on the bottom, and 2 on either side marked in red, More details [1] - thanks to aftermarketcellular.com
Retrieved from "http://www.repairmobile.net/Installation_of_a_Nokia_8260_faceplate_or_antenna"


Page Title: Installation of a Nokia 8260 faceplate or antenna